امیررضا خوئی

مقالات علمی چاپ شده در مجلات

1. "Genetic algorithm–based numerical optimization of powder compaction process with temperature–dependent cap plasticity model"
   Sh. Keshavarz ، امیررضا خوئی، Z. Molaeinia
   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY، شماره 64، صفحات:1-2،
2. "Multiscale modeling of surface effect via the boundary Cauchy-Born method"
   M.J. Abdolhosseini-Qomi ، A. Aghaei ، امیررضا خوئی
   INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING، شماره 85، صفحات:827-846،
3. "Effects of temperature and torsion speed on torsional properties of single-walled carbon nanotubes"
   امیررضا خوئی، E. Ban، P. Banihashemi، M.J. Abdolhosseini-Qomi
   MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS، شماره 31، صفحات:452-457،
4. "Modeling of cohesive crack growth in partially saturated porous media; A study on the permeability of cohesive fracture"
   O.R. Barani، امیررضا خوئی، مسعود مفید
   INTERNATIONAL JOURNAL OF FRACTURE، شماره 167، صفحات:15-31،
5. "Modeling of cohesive crack growth in partially saturated porous media; A study on the permeability of cohesive fracture"
   O.R. Barani، امیررضا خوئی، مسعود مفید
   INTERNATIONAL JOURNAL OF FRACTURE، شماره 167، صفحات:15-31،
6. "‘H-adaptive mesh refinement for shear band localization in elasto-plasticity Cosserat continuum’"
   امیررضا خوئی، A.R. Tabarraie، S.A. Gharehbaghi
   COMMUNICATIONS IN NUMERICAL METHODS IN ENGINEERING، شماره 10، صفحات:253-286،
7. "'Modeling of pressure-sensitive materials using a cap plasticity theory in extended finite element method"
   A. Shamloo، A.R. Azami، امیررضا خوئی
   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY، شماره 164، صفحات:1-2،
8. "'A constitutive model for finite deformation of endochronic plasticity in powder forming processes'"
   امیررضا خوئی، A. Bakhshiani
   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY، شماره 153، صفحات:12-19،
9. "'Computational modeling of 3D powder compaction processes'"
   امیررضا خوئی، A.R. Azami، S. Azizi
   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY، شماره 185، صفحات:166-172،
10. "The Superconvergence Patch Recovery and Data Transfer Operators in 3D Plasticity Problems’"
    امیررضا خوئی، S.A. Gharehbaghi
    FINITE ELEMENTS IN ANALYSIS AND DESIGN، شماره 43، صفحات:630-648،
11. "Three-dimensional data transfer operators in plasticity using SPR technique with C0, C1 and C2 continuity’"
    امیررضا خوئی، S.A. Gharehbaghi
    Scientia Iranica، شماره 15،
12. "Stability and size-dependency of temperature-related Cauchy-Born hypothesis"
    امیررضا خوئی، P. Ghahremani، M.J. Abdolhosseini-Qomi، P. Banihashemi
    COMPUTATIONAL MATERIALS SCIENCE، شماره 50، صفحات:1-2،
13. "Modeling of cohesive crack growth using an adaptive mesh refinement via the modified–SPR technique"
    امیررضا خوئی، H. Moslemi، K. Majd Ardakany، O.R. Barani، H. Azadi
    INTERNATIONAL JOURNAL OF FRACTURE، شماره 159، صفحات:21-41،
14. "'An enriched–FEM technique for large frictional contact deformation'"
    امیررضا خوئی، S.M. Taheri-Mousavi، S.O.R. Biabanaki، M. Anahid
    STEEL RESEARCH INTERNATIONAL، شماره 81، صفحات:1-2،
15. "A dynamic lattice model for heterogeneous materials"
    امیررضا خوئی، M.H. Pourmatin
    Computational Methods in Civil Engineering، شماره 2، صفحات:1-20،
16. "Modeling of dynamic cohesive fracture propagation in porous saturated media"
    امیررضا خوئی، O.R. Barani ، مسعود مفید
    INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS، شماره 35، صفحات:1-2،
17. "Error estimation, adaptivity and data transfer in enriched plasticity continua to analysis of shear band localization’"
    امیررضا خوئی، S.A. Gharehbaghi، A.R. Tabarraie، A. Riahi
    APPLIED MATHEMATICAL MODELLING، شماره 31، صفحات:983-1000،
18. "Three-dimensional superconvergent patch recovery method and its application to data transferring in small strain plasticity’"
    S.A. Gharehbaghi، امیررضا خوئی
    COMPUTATIONAL MECHANICS، شماره 41، صفحات:293-312،
19. "'Modeling of large deformation frictional contact in powder compaction processes'"
    امیررضا خوئی، Sh. Keshavarz، علیرضا خالو
    APPLIED MATHEMATICAL MODELLING، شماره 32، صفحات:775-801،
20. "'Modeling of large deformation frictional contact in powder compaction processes'"
    امیررضا خوئی، Sh. Keshavarz، علیرضا خالو
    APPLIED MATHEMATICAL MODELLING، شماره 32، صفحات:775-801،
21. "3D Adaptive Finite Element Modeling of Non-Planar Curved Crack Growth"
    H. Moslemi ، امیررضا خوئی
    ENGINEERING FRACTURE MECHANICS، شماره 76، صفحات:1-2،
22. "A large plasticity deformation of unsaturated soil for 3D dynamic analysis of lower San-Fernando dam"
    امیررضا خوئی، M. Anahid، M. Zarinfar، M. Ashouri، علی پاک
    Asian Journal of Civil Engineering، شماره 12، صفحات:1-25،
23. "A large plasticity deformation of unsaturated soil for 3D dynamic analysis of lower San-Fernando dam"
    امیررضا خوئی، M. Anahid، M. Zarinfar، M. Ashouri، علی پاک
    Asian Journal of Civil Engineering، شماره 12، صفحات:1-25،
24. "'Arbitrary Lagrangian-Eulerian method in plasticity of pressure-sensitive material with reference to powder forming process'"
    امیررضا خوئی، M. Anahid ، K. Shahim ، H. DorMohammadi
    COMPUTATIONAL MECHANICS، شماره 42، صفحات:13-38،
25. "A coupling atomistic-continuum approach for modeling mechanical behavior of nano-crystalline structures"
    امیررضا خوئی، A Aramoon، F Jahanbakhshi، H Dormohammadi
    صفحات:269-286،
26. "An efficient thermo-mechanical contact algorithm for modeling contact-impact problems"
    امیررضا خوئی، H Saffar، M Eghbalian
    صفحات:681-708،
27. "A polygonal-FEM technique in modeling large sliding contact on non-conformal meshes: A study on polygonal shape functions"
    امیررضا خوئی، R Yasbolaghi، S.O.R Biabanaki
    صفحات:1391-1431،
28. "Numerical simulation of 3D powder compaction processes using cone-cap plasticity theory"
    امیررضا خوئی، S. Azizi
    MATERIALS & DESIGN، شماره 26، صفحات:137-147،
29. "A coupling atomistic–continuum approach for modeling mechanical behavior of nano-crystalline structures"
    امیررضا خوئی، A. Aramoon ، F. Jahanbakhshi ، H. DorMohammadi
    COMPUTATIONAL MECHANICS، شماره 54، صفحات:269-286،
30. "Numerical simulation of ductile crack growth under cyclic and dynamic loading with a damage–viscoplasticity model"
    امیررضا خوئی، M. Eghbalian ، H. Azadi ، H. Saffar
    ENGINEERING FRACTURE MECHANICS، شماره 99، صفحات:169-190،
31. "A concurrent multi-scale technique in modeling heterogeneous FCC nano–crystalline structures"
    امیررضا خوئی، F. Jahanbakhshi ، A. Aramoon
    MECHANICS OF MATERIALS، شماره 83، صفحات:40-65،
32. "X-FEM modeling of dynamic ductile fracture problems with a nonlocal damage–viscoplasticity model"
    P. Broumand ، امیررضا خوئی
    FINITE ELEMENTS IN ANALYSIS AND DESIGN، شماره 99، صفحات:49-67،
33. "Polygonal finite element methods for contact-impact problems on non-conformal meshes"
    S.O.R. Biabanaki ، امیررضا خوئی، P. Wriggers
    COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING، شماره 269، صفحات:198-221،
34. "Multi-scale modeling of surface effects in nano-materials with temperature-related Cauchy-Born hypothesis via the modified boundary Cauchy-Born model"
    امیررضا خوئی، P. Ghahremani ، H. DorMohammadi
    INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING، شماره 97، صفحات:79-110،
35. "An investigation on the validity of Cauchy-Born hypothesis using Sutton-Chen many-body potential"
    امیررضا خوئی، M.J. Abdolhosseini-Qomi، محمدتقی کاظمی، A. Aghaei
    COMPUTATIONAL MATERIALS SCIENCE، شماره 44، صفحات:999-2،
36. "Numerical modeling of multiphase fluid flow in deforming porous media; A comparison between two- and three-phase models for seismic analysis of earth and rockfill dams"
    امیررضا خوئی، T. Mohamadnejad
    COMPUTERS AND GEOTECHNICS، شماره 38، صفحات:142-166،
37. "مدلسازی المان محدود رشد ترک چسبنده در محیط های متخلخل اشباع"
    امیررضا خوئی، مسعود مفید، امید رضا بارانی
    مجله آبیاری و زهکشی ایران، شماره 1، صفحات:43-56،
38. "A computational model for atomistic-based higher-order continua using the FEM technique"
    امیررضا خوئی، A. Rezaei Sameti
    FINITE ELEMENTS IN ANALYSIS AND DESIGN، شماره 137، صفحات:26-39،
39. "Crack growth modelling via 3D automatic adaptive mesh refinement based on modified–SPR technique"
    امیررضا خوئی، M. Eghbalian ، H. Moslemi ، H. Azadi
    APPLIED MATHEMATICAL MODELLING، شماره 37، صفحات:383-383،
40. "On the analysis of simple shear problem using the micropolar Cosserat theory"
    K. Karimi، امیررضا خوئی
    EUROPEAN JOURNAL OF MECHANICS A-SOLIDS، شماره 29، صفحات:664-674،
41. "Modeling of large deformation – large sliding contact via the penalty X-FEM technique"
    امیررضا خوئی، S.M. Taheri Mousavi
    COMPUTATIONAL MATERIALS SCIENCE، شماره 48، صفحات:471-480،
42. "'3D contact modelling of large plastic deformation in powder forming processes"
    امیررضا خوئی، S.O.R. Biabanaki، S.M. Taheri-Mousavi، A.R. Vafa، S.M. Parvaneh
    International Journal of Material Forming، شماره 5، صفحات:163-173،
43. "Reproducing kernel particle method in plasticity of pressure-sensitive material with reference to powder forming process’"
    امیررضا خوئی، M. Samimi، A.R. Azami
    COMPUTATIONAL MECHANICS، شماره 39، صفحات:247-270،
44. "کاربرد روش اجزاء محدود بسط یافته در مدلسازی ترک چسبنده"
    محمدتقی کاظمی، علیرضا فرقانی، امیررضا خوئی
    فصل نامه شریف - پ، شماره 1، صفحات:21-27،
45. "On the implementation of a multi-surface kinematic hardening plasticity and its applications"
    امیررضا خوئی، N. Jamali
    INTERNATIONAL JOURNAL OF PLASTICITY، شماره 21، صفحات:1-2،
46. "'New development in extended finite element modeling of large elasto-plastic deformations"
    M. Anahid ، امیررضا خوئی
    INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING، شماره 75، صفحات:1-2،
47. "کاربرد روش اجزاء محدود بسط یافته در مدلسازی ترک چسبنده"
    محمدتقی کاظمی، علیرضا فرقانی، امیررضا خوئی
    فصل نامه شریف - پ، شماره 1، صفحات:21-27،
48. "3D computational modeling of powder compaction processes using a three-invariant hardening cap plasticity model’"
    A.R. Azami، امیررضا خوئی
    FINITE ELEMENTS IN ANALYSIS AND DESIGN، شماره 42، صفحات:792-807،
49. "'Contact friction modelling with the extended finite element method (X-FEM)"
    امیررضا خوئی، M. Nikbakht
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY، شماره 177، صفحات:58-62،
50. "X-FEM modeling of large plasticity deformation; A convergence study on various blending strategies for weak discontinuities"
    امیررضا خوئی، M. Vahab ، H. Ehsani ، M. Rafieerad
    EUROPEAN JOURNAL OF COMPUTATIONAL MECHANICS، شماره 24، صفحات:79-106،
51. "Extended finite element modeling of deformable porous media with arbitrary interfaces"
    امیررضا خوئی، E. Haghighat
    APPLIED MATHEMATICAL MODELLING، شماره 35، صفحات:1-2،
52. "Modeling of powder forming processes in transient-dynamic analysis of large plastic deformations"
    امیررضا خوئی، S.O.R. Biabanaki ، S.M. Parvaneh
    Advanced Materials Research، شماره 445، صفحات:362-367،
53. "Thermo-hydro-mechanical modeling of impermeable discontinuity in saturated porous media with X–FEM technique"
    امیررضا خوئی، S. Moallemi ، E. Haghighat
    ENGINEERING FRACTURE MECHANICS، شماره 96، صفحات:701-723،
54. "An extended finite element method for fluid flow in partially saturated porous media with weak discontinuities; The convergence analysis of local enrichment strategies"
    T. Mohamadnejad ، امیررضا خوئی
    COMPUTATIONAL MECHANICS، شماره 51، صفحات:327-345،
55. "3D modeling of damage growth and crack initiation using adaptive finite element technique"
    H. Moslemi ، امیررضا خوئی
    Scientia Iranica، شماره 17، صفحات:372-386،
56. "Optimal design of powder compaction processes via genetic algorithm technique"
    امیررضا خوئی، Sh. Keshavarz، S.O.R. Biabanaki
    FINITE ELEMENTS IN ANALYSIS AND DESIGN، شماره 46، صفحات:843-861،
57. "Validity and size-dependency of Cauchy-Born hypothesis with Tersoff potential in silicon nano-structures"
    امیررضا خوئی، H. DorMohammadi
    COMPUTATIONAL MATERIALS SCIENCE، شماره 63، صفحات:168-177،
58. "Modeling of hot isostatic pressing of metal powder with temperature–dependent cap plasticity model"
    امیررضا خوئی، Sh. Keshavarz ، Z. Molaeinia
    International Journal of Material Forming، شماره 6، صفحات:363-376،
59. "3D dynamic modeling of powder forming processes via a simple and efficient node-to-surface contact algorithm"
    امیررضا خوئی، S.O.R. Biabanaki ، S.M. Parvaneh
    APPLIED MATHEMATICAL MODELLING، شماره 37، صفحات:443-462،
60. "Adaptive refinement in meshless finite volume method for elasticity problems"
    M. Ebrahimnejad ، N. Fallah ، امیررضا خوئی
    COMPUTERS & MATHEMATICS WITH APPLICATIONS، شماره 69، صفحات:1-2،
61. "A polygonal finite element method for modeling arbitrary interfaces in large deformation problems"
    S.O.R. Biabanaki ، امیررضا خوئی
    COMPUTATIONAL MECHANICS، شماره 50، صفحات:19-33،
62. "The genetic algorithm approach for shape optimization of powder compaction processes considering contact friction and cap plasticity models"
    امیررضا خوئی، Sh. Keshavarz، علیرضا خالو
    ENGINEERING COMPUTATIONS، شماره 27، صفحات:322-353،
63. "Numerical simulation of cyclic behavior of ductile metals with a coupled damage–viscoplasticity model"
    امیررضا خوئی، M. Eghbalian
    COMPUTATIONAL MATERIALS SCIENCE، شماره 55، صفحات:376-389،
64. "The genetic algorithm approach for shape optimization of powder compaction processes considering contact friction and cap plasticity models"
    امیررضا خوئی، Sh. Keshavarz، علیرضا خالو
    ENGINEERING COMPUTATIONS، شماره 27، صفحات:322-353،
65. "Three-dimensional cohesive fracture modeling of non-planar crack growth using adaptive FE technique"
    امیررضا خوئی، H. Moslemi ، M. Sharifi
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES، شماره 49، صفحات:1-2،
66. "A polygonal finite element method for modeling crack propagation without remeshing"
    امیررضا خوئی، R. Yasbolaghi ، S.O.R. Biabanaki
    INTERNATIONAL JOURNAL OF FRACTURE، شماره 2015، صفحات:123-148،
67. "Modeling the interaction between fluid-driven fracture and natural fault using an enriched–FEM technique"
    امیررضا خوئی، M. Vahab ، M. Hirmand
    INTERNATIONAL JOURNAL OF FRACTURE، شماره 197، صفحات:1-24،
68. "3D Modeling of cohesive crack growth in partially saturated porous media; A parametric study"
    O.R. Barani ، امیررضا خوئی
    ENGINEERING FRACTURE MECHANICS، صفحات:272-286،
69. "An efficient thermo–mechanical contact algorithm for modeling contact–impact problems"
    امیررضا خوئی، H. Saffar ، M. Eghbalian
    Asian Journal of Civil Engineering، شماره 16، صفحات:681-708،
70. "An augmented Lagrangian contact formulation for frictional discontinuities with the extended finite element method"
    M. Hirmand ، M. Vahab ، امیررضا خوئی
    FINITE ELEMENTS IN ANALYSIS AND DESIGN، شماره 2015، صفحات:28-43،
71. "The extended finite element method for large deformation ductile fracture problems with a non-local damage–plasticity model"
    P. Broumand ، امیررضا خوئی
    ENGINEERING FRACTURE MECHANICS، شماره 112، صفحات:97-125،
72. "A numerical contact algorithm in saturated porous media with the extended finite element method"
    امیررضا خوئی، M. Vahab
    COMPUTATIONAL MECHANICS، شماره 54، صفحات:1-2،
73. "Two new approximation functions with the meshless finite volume formulation for 2D elasticity problems"
    M. Ebrahimnejad ، N. Fallah ، امیررضا خوئی
    ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS، شماره 46، صفحات:10-22،
74. "Numerical modeling of two-phase fluid flow in deformable fractured porous media using the extended finite element method and an equivalent continuum model"
    امیررضا خوئی، N. Hosseini ، T. Mohamadnejad
    ADVANCES IN WATER RESOURCES، شماره 94، صفحات:510-528،
75. "A polygonal–FEM technique in modeling large sliding contact on non-conformal meshes; A study on polygonal shape functions"
    امیررضا خوئی، R. Yasbolaghi ، S.O.R. Biabanaki
    ENGINEERING COMPUTATIONS، شماره 32، صفحات:1-2،
76. "Three types of meshless finite volume method for the analysis of two-dimensional elasticity problems"
    M. Ebrahimnejad ، N. Fallah ، امیررضا خوئی
    COMPUTATIONAL AND APPLIED MATHEMATICS، شماره 1، صفحات:1-20،
77. "An enriched FEM technique for modeling hydraulically-driven cohesive fracture propagation in impermeable media with frictional natural faults; Numerical and experimental investigations"
    امیررضا خوئی، M. Hirmand ، M. Vahab ، M. Bazargan
    INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING، شماره 104، صفحات:439-468،
78. "A concurrent multi-scale modeling for dynamic behavior of nano-crystalline structures"
    امیررضا خوئی، A. Aramoon ، F. Jahanbakhshi ، H. DorMohammadi
    COMPUTATIONAL MATERIALS SCIENCE، شماره 79، صفحات:841-856،
79. "A mesh-independent finite element formulation for modeling crack growth in saturated porous media based on an enriched–FEM technique"
    امیررضا خوئی، M. Vahab ، E. Haghighat ، S. Moallemi
    INTERNATIONAL JOURNAL OF FRACTURE، شماره 188، صفحات:79-108،
80. "Multi-scale modeling of edge effect on band gap offset in polygonal cross-section Silicon nanowires"
    امیررضا خوئی، H. DorMohammadi ، A. Aramoon
    COMPUTATIONAL MATERIALS SCIENCE، شماره 79، صفحات:262-275،
81. "A single cone-cap plasticity with an isotropic hardening rule for powder materials’"
    امیررضا خوئی، A.R. Azami
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES، شماره 47، صفحات:94-109،
82. "Hydro-mechanical modeling of cohesive crack propagation in multiphase porous media using the extended-FEM technique"
    T. Mohamadnejad ، امیررضا خوئی
    INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS، شماره 37، صفحات:1-2،
83. "A temperature-related boundary Cauchy-Born method for multi-scale modeling of silicon nano-structures"
    امیررضا خوئی، H. DorMohammadi ، A. Aramoon
    PHYSICS LETTERS A، شماره 378، صفحات:551-560،
84. "Effect of defects on the local shell buckling and post-buckling behavior of single and multi-walled carbon nanotubes"
    Mehdi Eftekhari ، Soheil Mohammadi ، امیررضا خوئی
    COMPUTATIONAL MATERIALS SCIENCE، شماره 79، صفحات:736-744،
85. "An extended finite element method for hydraulic fracture propagation in deformable porous media using the cohesive crack model"
    T. Mohammadnejad ، امیررضا خوئی
    FINITE ELEMENTS IN ANALYSIS AND DESIGN، شماره 73، صفحات:77-95،
86. "'An enriched-FEM model for simulation of localization phenomenon in Cosserat continuum theory"
    امیررضا خوئی، K. Karimi
    COMPUTATIONAL MATERIALS SCIENCE، شماره 44، صفحات:733-749،
87. "'Modeling of crack propagation via an automatic adaptive mesh refinement based on modified superconvergent patch recovery technique'"
    امیررضا خوئی، H. Azadi ، H. Moslemi
    ENGINEERING FRACTURE MECHANICS، شماره 75، صفحات:1-2،
88. "'Contact friction simulation in powder compaction process based on the penalty approach"
    Sh. Keshavarz، امیررضا خوئی، علیرضا خالو
    MATERIALS & DESIGN، شماره 29، صفحات:1-2،
89. "'Contact friction simulation in powder compaction process based on the penalty approach"
    Sh. Keshavarz، امیررضا خوئی، علیرضا خالو
    MATERIALS & DESIGN، شماره 29، صفحات:1-2،
90. "An investigation on the validity of Cauchy-Born hypothesis using Sutton-Chen many-body potential"
    امیررضا خوئی، M.J. Abdolhosseini-Qomi، محمدتقی کاظمی، A. Aghaei
    COMPUTATIONAL MATERIALS SCIENCE، شماره 44، صفحات:999-2،
91. "A hypoelasto-viscoplastic endochronic model of numerical simulation of shear band localization"
    امیررضا خوئی، A. Bakhshiani
    FINITE ELEMENTS IN ANALYSIS AND DESIGN، شماره 41، صفحات:1-2،
92. "A three-invariant hardening plasticity for numerical simulation of powder forming processes via the arbitrary Lagrangian-Eulerian FE model’"
    امیررضا خوئی، A.R. Azami، M. Anahid، R.W. Lewis
    INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING، شماره 66، صفحات:843-877،
93. "Extended finite element method in plasticity forming of powder compaction with contact friction"
    امیررضا خوئی، A. Shamloo، A.R. Azami
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES، شماره 43، صفحات:1-2،
94. "'Three-dimensional modeling of strain localization in Cosserat continuum theory'"
    امیررضا خوئی، S. Yadegari، M. Anahid
    International Journal of Civil Engineering، شماره 4، صفحات:176-191،
95. "'The extended finite element method (X-FEM) for powder forming problems'"
    امیررضا خوئی، A. Shamloo، M. Anahid، K. Shahim
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY، شماره 177، صفحات:53-57،
96. "Stability and size dependency of Cauchy-Born hypothesis in three-dimenional application"
    amin Aghaei، mohammad Qomi، محمدتقی کاظمی، امیررضا خوئی
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES، شماره 46، صفحات:1-2،
97. "Stability and size dependency of Cauchy-Born hypothesis in three-dimenional application"
    amin Aghaei، mohammad Qomi، محمدتقی کاظمی، امیررضا خوئی
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES، شماره 46، صفحات:1-2،
98. "Three-dimensional data transfer operators in large plasticity"
    امیررضا خوئی، S.A. Gharehbaghi
    APPLIED MATHEMATICAL MODELLING، شماره 33، صفحات:1-2،
99. "‘Implementation of plasticity based models in dynamic analysis of saturated-unsaturated earth and rockfill dams’"
    امیررضا خوئی، A.R. Azami، سیدمحسن حائری
    COMPUTERS AND GEOTECHNICS، شماره 31، صفحات:385-410،
100. "‘Implementation of plasticity based models in dynamic analysis of saturated-unsaturated earth and rockfill dams’"
     امیررضا خوئی، A.R. Azami، سیدمحسن حائری
     COMPUTERS AND GEOTECHNICS، شماره 31، صفحات:385-410،
101. "'A density-dependent endochronic plasticity for powder compaction processes"
     A. Bakhshiani، امیررضا خوئی، مسعود مفید
     COMPUTATIONAL MECHANICS، شماره 34، صفحات:53-66،
102. "'A density-dependent endochronic plasticity for powder compaction processes"
     A. Bakhshiani، امیررضا خوئی، مسعود مفید
     COMPUTATIONAL MECHANICS، شماره 34، صفحات:53-66،
103. "A new computational algorithm for 3D contact modeling of large plastic"
     امیررضا خوئی، S.O.R. Biabanaki ، A.R. Vafa ، S.M. Taheri-Mousavi
     COMPUTATIONAL MATERIALS SCIENCE، شماره 46، صفحات:203-220،
104. "A hypoelasto-plastic finite strain simulation of powder compaction processes with density dependent endochronic model’"
     امیررضا خوئی، A. Bakhshiani
     INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES، شماره 41، صفحات:1-2،
105. "An enriched finite element algorithm for numerical computation of contact friction problems"
     امیررضا خوئی، M. Nikbakht
     INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES، شماره 49، صفحات:183-199،
106. "A Lagrangian – extended finite element method in modeling large plasticity deformations and contact problems"
     امیررضا خوئی، S.O.R. Biabanaki ، M. Anahid
     INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES، شماره 51، صفحات:384-401،
107. "مدلسازی المان محدود رشد ترک چسبنده در محیط های متخلخل اشباع"
     امیررضا خوئی، مسعود مفید، امید رضا بارانی
     مجله آبیاری و زهکشی ایران، شماره 1، صفحات:43-56،
108. "'A three-invariant cap plasticity with isotropic-kinematic hardening rule for powder materials"
     امیررضا خوئی، H. DorMohammadi
     COMPUTATIONAL MATERIALS SCIENCE، شماره 41، صفحات:1-12،
109. "SUT-DAM: An integrated software environment for multi-disciplinary geotechnical engineering"
     امیررضا خوئی، S.A. Gharehbaghi، A.R. Azami، A.R. Tabarraie
     ADVANCES IN ENGINEERING SOFTWARE، شماره 37، صفحات:728-753،
110. "'A new computational algorithm for contact friction modeling of large plastic deformation in powder compaction processes'"
     امیررضا خوئی، S.O.R. Biabanaki، A.R. Vafa، I. Yadegaran، Sh. Keshavarz
     INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES، شماره 46، صفحات:287-310،
111. "'Extended Finite Element Method for Three–Dimensional Large Plasticity Deformations"
     امیررضا خوئی، O. Biabanaki، M. Anahid
     COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING، شماره 197، صفحات:1-2،
112. "'An extended arbitrary Lagrangian–Eulerian finite element method for large deformation of solid mechanics"
     امیررضا خوئی، M. Anahid ، K. Shahim
     FINITE ELEMENTS IN ANALYSIS AND DESIGN، شماره 44، صفحات:401-416،
113. "'A three-invariant cap model with isotropic–kinematic hardening rule and associated plasticity for granular materials"
     H. DorMohammadi، امیررضا خوئی
     INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES، شماره 45، صفحات:631-656،
114. "Mechanical properties of graphene oxide; A molecular dynamics study"
     امیررضا خوئی، M.S. Khorrami
     FULLERENES NANOTUBES AND CARBON NANOSTRUCTURES، شماره 24، صفحات:594-603،
115. "An efficient enrichment strategy for modeling stress singularities in isotropic composite materials with X-FEM technique'"
     Sh. Akhondzadeh ، امیررضا خوئی، P. Broumand
     ENGINEERING FRACTURE MECHANICS، شماره 169، صفحات:201-225،
116. "Multi-scale modeling of plastic deformations in nano-scale materials; Transition to plastic limit"
     امیررضا خوئی، M. Jahanshahi
     INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING، شماره 109، صفحات:1-2،
117. "Local density variation of gold nanoparticles in aquatic environments"
     F. Hosseinzadeh ، F. Shirazian ، R. Shahsavari ، امیررضا خوئی
     PHYSICA E، شماره 84، صفحات:489-497،
118. "General framework for dynamic large deformation contact problems based on phantom-node X-FEM"
     P. Broumand ، امیررضا خوئی
     COMPUTATIONAL MECHANICS، شماره 1، صفحات:1-21،
119. "Validity of Cauchy-Born hypothesis in multi-scale modeling of plastic deformations"
     امیررضا خوئی، M. Jahanshahi ، G. Toloui
     INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES، شماره 115، صفحات:224-247،
120. "A polygonal–FEM technique in modeling arbitrary interfaces on non-conformal meshes; A study on polygonal shape functions"
     امیررضا خوئی، S.O.R. Biabanaki ، R. Yasbolaghi
     EUROPEAN JOURNAL OF COMPUTATIONAL MECHANICS، شماره 23، صفحات:15-37،
121. "Temperature-dependent multi-scale modeling of surface effects in nano-materials"
     امیررضا خوئی، P. Ghahremani
     MECHANICS OF MATERIALS، شماره 46، صفحات:94-112،
122. "Modeling of dynamic cohesive fracture propagation in porous saturated media"
     امیررضا خوئی، O.R. Barani ، مسعود مفید
     INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS، شماره 35، صفحات:1-2،
123. "Dynamic modeling of powder compaction processes via a simple contact algorithm"
     امیررضا خوئی، S.O.R. Biabanaki ، S.M. Parvaneh
     INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES، شماره 64، صفحات:196-210،
124. "A multi-scale modeling of surface effect via the modified boundary Cauchy–Born model"
     امیررضا خوئی، A. Aramoon
     MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS، شماره 32، صفحات:1-2،
125. "3D finite element modeling of shear band localization via the micro–polar Cosserat continuum theory"
     امیررضا خوئی، S. Yadegari، S.O.R. Biabanaki
     COMPUTATIONAL MATERIALS SCIENCE، شماره 49، صفحات:720-733،
126. "'A three-invariant cap plasticity model with kinematic hardening rule for powder materials"
     امیررضا خوئی، H. DorMohammadi، A.R. Azami
     JOURNAL OF MATERIALS PROCESSING TECHNOLOGY، شماره 187، صفحات:680-684،
127. "Numerical simulation of multiple crack growth in brittle materials with adaptive remeshing"
     H. Azadi ، امیررضا خوئی
     INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING، شماره 85، صفحات:1-2،
128. "'An extended arbitrary Lagrangian-Eulerian finite element modeling (X-ALE-FEM) in powder forming processes"
     امیررضا خوئی، M. Anahid، K. Shahim
     JOURNAL OF MATERIALS PROCESSING TECHNOLOGY، شماره 187، صفحات:397-401،
129. "Modeling of moving boundaries in large plasticity deformations via an enriched arbitrary Lagrangian–Eulerian FE method"
     M. Anahid، امیررضا خوئی
     Scientia Iranica، شماره 17، صفحات:141-160،
130. "A continuum-atomistic multi-scale analysis of temperature field problems and its application in phononic nano-structures"
     امیررضا خوئی، R Yasbolaghi
     FINITE ELEMENTS IN ANALYSIS AND DESIGN، 1400
131. "Numerical simulation of cold and hot water injection into naturally fractured porous media using the extended-FEM and an equivalent continuum model"
     سیدمحمدصادق مرتضوی، پوریا پیرمرادی، امیررضا خوئی
     INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS، شماره 3، صفحات:617-655، 1400
132. "Multiscale modeling of coupled thermo-hydro-mechanical analysis of heterogeneous porous media"
     امیررضا خوئی، Saeed Saeedmonir
     COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING، 1400
133. "An atomistic-continuum multiscale analysis for heterogeneous nanomaterials and its application in nanoporous gold foams"
     Y Nikravesh، A Rezaei Sameti، امیررضا خوئی
     APPLIED MATHEMATICAL MODELLING، صفحات:353-378، 1400
134. "Modeling Fluid Flow in Fractured Porous Media with the Interfacial Conditions Between Porous Medium and Fracture"
     نوید حسینی، امیررضا خوئی
     TRANSPORT IN POROUS MEDIA، شماره 1، صفحات:109-129، 1399
135. "A coarse-grained - Atomistic multi-scale method to study the mechanical behavior of heterogeneous FCC nano-materials"
     اشکان علی مددی احمدابادی، امیررضا خوئی
     COMPUTATIONAL MATERIALS SCIENCE، شماره 110725، 1399
136. "Atomistic simulation of creep deformation mechanisms in nickel-based single crystal superalloys"
     امیررضا خوئی، G. Tolooei Eshlaghi، S. Shahoveisi
     MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROST، شماره 809، صفحات:140977-140977، 1399
137. "An X-FEM Technique for Modeling the FRP Strengthening of Concrete Arches with a Plastic-Damage Model; Numerical and Experimental Investigations"
     امیررضا خوئی، Tahmaz Ahmadpour، Yousef Navidtehrani
     EUROPEAN JOURNAL OF COMPUTATIONAL MECHANICS، صفحات:1-50، 1399
138. "Mechanical Properties And gamma/gamma'Interfacial Misfit Network Evolution: A Study Towards the Creep Behavior of Ni-Based Single Crystal Superalloys"
     امیررضا خوئی، Mehrdad Youzi، Amir Khoei
     MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROST، 1399
139. "Modeling non-isothermal two-phase fluid flow with phase change in deformable fractured porous media using extended finite element method"
     امیررضا خوئی، دانیال امینی، سیدمحمدصادق مرتضوی
     INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING، شماره 16، صفحات:4378-4426، 1399
140. "Mechanical behavior of multilayer graphene reinforced epoxy nano-composites via a hierarchical multi-scale technique"
     H. Ahmadi، M. Jahanshahi، امیررضا خوئی، S. Bordas
     Carbon Trends، شماره 4، صفحات:100048-100048، 1399
141. "Modeling non-isothermal two-phase fluid flow with phase change in deformable fractured porous media using X–FEM technique"
     امیررضا خوئی، Danial Amini، Mohammad S. Mortazavi
     INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING، شماره 6709، صفحات:1-49، 1399
142. "Computational homogenization of fully coupled multiphase flow in deformable porous media"
     امیررضا خوئی، S. Saeedmonir
     COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING، شماره 371، صفحات:113660-113660، 1399
143. "An enriched-finite element technique for numerical simulation of hydro-fracture evolution in naturally-layered formations"
     امیررضا خوئی، A.R Khoei، S.H Akhondzadeh، M Vahab
     Proceedings of the 6th European Conference on Computational Mechanics: Solids, Structures and Coupled Problems, ECCM 2018 and 7th European Conference on Computational Fluid Dynamics, ECFD 2018، صفحات:1685-1696، 1398
144. "Numerical simulation of proppant transport and tip screen-out in hydraulic fracturing with the extended finite element method"
     امیررضا خوئی، نوید حسینی
     INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES، شماره 128، صفحات:104247-104247، 1398
145. "Numerical modeling of density-driven solute transport in fractured porous media with the extended finite element method"
     امیررضا خوئی، نوید حسینی، زهرا باجلان
     ADVANCES IN WATER RESOURCES، شماره 136، صفحات:103453-103453، 1398
146. "Numerical simulation of proppant transport and tip screen-out in hydraulic fracturing using XFEM "
     N. Hosseini، امیررضا خوئی
     INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES، شماره 128، صفحات:104247-104247، 1398
147. "A hierarchical hyperelastic-based approach for multi-scale analysis of defective nano-materials"
     محسن جهانشاهی، حسین احمدی، امیررضا خوئی
     MECHANICS OF MATERIALS، شماره 140، صفحات:103206-103206، 1398
148. "Micro-structural aspects of fatigue crack propagation in atomistic-scale via the molecular dynamics analysis"
     امیررضا خوئی، رضا یاسبلاغی
     ENGINEERING FRACTURE MECHANICS، شماره 226، صفحات:106848-106848، 1398
149. "Modeling of reactive acid transport in fractured porous media with the Extended–FEM based on Darcy-Brinkman-Forchheimer framework"
     امیررضا خوئی، Salehi Sichani A.، N. Hosseini
     COMPUTERS AND GEOTECHNICS، شماره 128، صفحات:103778-103778، 1398
150. "An efficient stress recovery technique in adaptive finite element method using artificial neural network"
     امیررضا خوئی، H. Moslemi، MR Seddighia
     ENGINEERING FRACTURE MECHANICS، شماره 237، صفحات:107231-107231، 1398
151. "Thermo-hydro-mechanical modeling of fracturing porous media with two-phase fluid flow using X-FEM technique"
     امیررضا خوئی، S.M.S. Mortazavi
     INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS، شماره 44، صفحات:2430-2472، 1398
152. "Compaction simulation of crystalline nano-powders under cold compaction process with molecular dynamics analysis"
     امیررضا خوئی، A. Rezaei Sameti، H. Mofatteh
     POWDER TECHNOLOGY، شماره 373، صفحات:741-753، 1398
153. "A hierarchical hyperelastic approach for multiscale analysis of defective nano materials"
     M. Jahanshahi، H. Ahmadi، امیررضا خوئی
     MECHANICS OF MATERIALS، شماره 140، صفحات:103206-103206، 1398
154. "A coarse-graining approach for modelling nonlinear mechanical behaviour of FCC nano-crystals"
     محسن جهانشاهی، ملیکا وخشوری، امیررضا خوئی
     COMPUTATIONAL MATERIALS SCIENCE، شماره 172، صفحات:109357-109357، 1398
155. "An X–FEM technique in modeling hydro-fracture interaction with naturally-cemented fault"
     امیررضا خوئی، M. Vahab ، N. Khalili
     ENGINEERING FRACTURE MECHANICS، شماره 212، صفحات:269-290، 1397
156. "An x-fem investigation of deflection/penetration of hydro-fractures material discontinuities"
     امیررضا خوئی، A.R Khoe، S Akhondzade، M Vaha
     Rock Dynamics Summit - Proceedings of the 2019 Rock Dynamics Summit, RDS 2019، صفحات:604-610، 1397
157. "A computational plastic–damage method for modeling the FRP strengthening of concrete arches"
     امیررضا خوئی، T. Ahmadpour ، Y. NavidTehrani
     Scientia Iranica، شماره 26، صفحات:2123-2132، 1397
158. "A nonlocal computational homogenization of softening quasi-brittle materials"
     امیررضا خوئی، محمد علی سعادت
     INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING، شماره 119، صفحات:712-736، 1397
159. "A bridge between dual porosity and multi-scale models of heterogeneous deformable porous media"
     امیررضا خوئی، M.R. Hajiabadi
     INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS، شماره 43، صفحات:212-238، 1397
160. "An enriched–FEM technique for numerical simulation of interacting discontinuities in naturally fractured porous media"
     امیررضا خوئی، M. Vahab ، M. Hirmand
     COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING، شماره 331، صفحات:197-231، 1396
161. "An X-FEM investigation of hydro-fracture evolution in naturally-layered domains"
     M. Vahab ، Sh. Akhondzadeh ، امیررضا خوئی، N. Khalili
     ENGINEERING FRACTURE MECHANICS، شماره 191، صفحات:187-204، 1396
162. "Fully coupled hydromechanical multiscale model with microdynamic effects"
     امیررضا خوئی، محمدرضا حاجی آبادی
     INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING، شماره 115، صفحات:293-327، 1396
163. "Application of an enriched FEM technique in thermo-mechanical contact problems"
     امیررضا خوئی، B. Bahmani
     COMPUTATIONAL MECHANICS، شماره 62، صفحات:1127-1154، 1396
164. "A continuum-atomistic multi-scale technique for nonlinear behavior of nano-materials"
     امیررضا خوئی، A. Rezaei Sameti ، Y. Nikravesh Kazerooni
     INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES، شماره 148، صفحات:191-208، 1396
165. "Fully coupled hydro-mechanical multi-scale model with micro-dynamic effects"
     امیررضا خوئی، M.R. Hajiabadi
     INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING، شماره 115، صفحات:293-327، 1396
166. "A hierarchical thermo-mechanical multi-scale technique for modeling of edge dislocations in nano-crystalline structure"
     M. Jahanshahi ، امیررضا خوئی، N. Heidarzadeh ، N. Jafarian
     COMPUTATIONAL MATERIALS SCIENCE، شماره 141، صفحات:360-374، 1396
167. "An atomistic–continuum multi-scale method for modeling the thermo-mechanical behavior of heterogeneous nano-structures"
     امیررضا خوئی، M. Jahanshahi، N. Jafarian، N. Heidarzadeh
     INTERNATIONAL JOURNAL FOR MULTISCALE COMPUTATIONAL ENGINEERING، شماره 16، صفحات:441-464، 1396
168. "An X-FEM Implementation of Hydro-Fracture Growth in Naturally Fractured Saturated Porous Media"
     امیررضا خوئی، A.R Khoei، M Vahab
     Poromechanics 2017 - Proceedings of the 6th Biot Conference on Poromechanics، صفحات:2027-2034، 1395
169. "Compaction simulation of nano-crystalline metals with molecular dynamics analysis"
     M Babaei، H Mofatteh، A Rezaei Sameti، امیررضا خوئی
     MATEC Web of Conferences، 1394
170. "Extended finite element method: theory and applications"
     امیررضا خوئی
     John Wiley & Sons، 1393

مقالات علمی ارائه شده در همایش ها

1. "An X-FEM investigation of deflection-penetration of hydro-fractures at material discontinuities"
   امیررضا خوئی, محمد وهاب, شمس الدین آخوندزاده, ناصر خلیلی
   Rock Dynamics Summit, A Specialized Conference of ISR, pp.1-8, 2019
2. "An enriched finite element technique for numerical simulation of hydro-fracture evolution in naturally-layered formations/6th European Conference on Computational Mechanics (ECCM 6)"
   M. Vahab , Sh. Akhondzadeh , امیررضا خوئی, N. Khalili
   6th European Conference on Computational Mechanics (ECCM 6), pp.1-12, 2018
3. "A multi-scale method for nonlinear mechanical behaviour of nano-structures based on coarse-grained model/16th European Mechanics of Materials Conference (EMMC16)"
   S.M. Vokhshoorikoohi , امیررضا خوئی, M. Jahanshahi
   16th European Mechanics of Materials Conference (EMMC16), pp.1-6, 2018
4. "Multiscale modeling of cohesive crack growth based on XFEM and damage model/11th International Congress on Civil Engineering (ICCE 2018)"
   M. SalahiNezhad , امیررضا خوئی, M.A. S?adat
   11th International Congress on Civil Engineering (ICCE 2018), pp.1-8, 2018
5. "Investigation of void shape effects on the mechanical behavior of FCC nano-crystal based on molecular dynamics simulation/12th International Nanoscience and Nanotechnology Conference"
   H. Ahmadi , N. Jafarian , M Jahanshahi , امیررضا خوئی
   12th International Nanoscience and Nanotechnology Conference, pp.1-3, 2017
6. "Modeling of thermo-mechanical contact problems in fractured domain with extended finite element method/7th International Conference on Computational Methods for Coupled Problems in Science and Engineering (Coupled Problems 2017)"
   B. Bahmani , امیررضا خوئی
   7th International Conference on Computational Methods for Coupled Problems in Science and Engineering (Coupled Problems 2017), pp.1-6, 2017
7. "Numerical simulation of interacting discontinuities in naturally fractured saturated porous media with X-FEM/14th International Conference on Computational Plasticity (COMPLAS 2017)"
   امیررضا خوئی, M. Vahab , M. Hirmand
   14th International Conference on Computational Plasticity (COMPLAS 2017), pp.1-20, 2017
8. "An X-FEM technique for simulation of hydraulic fracturing in impervious fractured domains; Numerical and experimental investigations/6th International Conference on Coupled THMC Processes in Geosystems (GeoProc 2017)"
   M. Vahab , امیررضا خوئی, N. Khalili
   6th International Conference on Coupled THMC Processes in Geosystems (GeoProc 2017), pp.1-6, 2017
9. "Modeling convective heat propagation in a fractured domain with X-FEM and least square method/ASME 2017 International Mechanical Engineering Congress & Exposition (IMECE2017)"
   B. Bahmani , امیررضا خوئی
   ASME 2017 International Mechanical Engineering Congress & Exposition (IMECE2017), pp.1-6, 2017
10. "Compaction simulation of nano-crystalline metals with molecular dynamics analysis/12th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM 2016)"
    امیررضا خوئی, A. Rezaei Sameti , H. Mofatteh , M. Babaei
    12th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM 2016), pp.1-8, 2016
11. "A hierarchical multi-scale technique for modeling heterogeneous nano-materials/12th International Nanoscience and Nanotechnology Conference"
    N. Jafarian , H. Ahmadi , N. Heidarzadeh , امیررضا خوئی, M Jahanshahi
    12th International Nanoscience and Nanotechnology Conference, pp.1-3, 2016
12. "Size variation of Gold nano-particles in aquatic environments"
    F. Hosseinzadeh , امیررضا خوئی
    6th International Conference on Nanostructures (ICNS6), pp.1-3, 2016
13. "A multi-scale approach for analyzing the behavior of nano-materials with FCC structure in large deformation/12th International Nanoscience and Nanotechnology Conference"
    H. Ahmadi , N. Jafarian , امیررضا خوئی, M Jahanshahi
    12th International Nanoscience and Nanotechnology Conference, pp.1-3, 2016
14. "Modeling the thermal conduction phenomenon at bimaterial interface with the X-FEM technique and Lagrange multipliers method/24th Annual Conference on Mechanical Engineering (ISME 2016)"
    امیررضا خوئی, B. Bahmani
    24th Annual Conference on Mechanical Engineering (ISME 2016), pp.1-6, 2016
15. "Investigation of the effect of intensive inclusion on nano-structures/International Nanoscience and Nanotechnology Conference"
    N. Jafarian , H. Ahmadi , N. Heidarzadeh , امیررضا خوئی, M Jahanshahi
    International Nanoscience and Nanotechnology Conference, pp.1-3, 2016
16. "Molecular dynamics simulation of Nickel nano-powder compaction"
    امیررضا خوئی, M. Babaei
    5th International Conference on Nanostructures (ICNS5), pp.1-3, 2014
17. "Modeling hydraulic fracturing in pre-fractured porous media using the extended finite element method"
    M. Vahab , امیررضا خوئی
    XFEM, GFEM and Fictitious Domain Methods: Recent Developments and Applications (XFEM 2013), pp.1-6, 2013
18. "3D modelling of cohesive fracture growth in semi-saturated porous media"
    O.R. Barani , امیررضا خوئی
    6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), pp.1-6, 2012
19. "Design optimization of hot forming process of metal powders via the genetic algorithm technique"
    امیررضا خوئی, Sh. Keshavarz , Z. Molaeinia
    14th International Conference on Metal Forming, pp.1-4, 2012
20. "Optimal design of hot powder compaction process via the genetic algorithm technique"
    امیررضا خوئی, Sh. Keshavarz
    Advances in Materials and Processing Technologies (AMPT 2012), pp.1-4, 2012
21. "Modelling the ductile fracture mechanics with non-local gradient damage plasticity model coupled with XFEM technique"
    امیررضا خوئی, P. Broumand
    6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), pp.1-6, 2012
22. "Modelling hot isostatic pressing of metal powder via a temperature–dependent cap plasticity model"
    امیررضا خوئی, Sh. Keshavarz, Z. Molaeinia
    Advances in Materials and Processing Technologies (AMPT 2011), pp.1-6, 2011
23. "Modeling of crack propagation and fluid flow in multi-phase porous media using a modified X-FEM technique"
    امیررضا خوئی, T. Mohammadnejad, E. Haghighat
    International Conference on Extended Finite Element Methods (XFEM 2011), pp.1-4, 2011
24. "Modeling ductile fracture with damage plasticity using X-FEM technique"
    P. Borumand , امیررضا خوئی
    International Conference on Extended Finite Element Methods (XFEM 2011), pp.1-4, 2011
25. "Hydro-mechanical modeling of two-phase fluid flow in deforming, partially saturated porous media with propagating cohesive cracks using the extended-FEM method"
    T. Mohamadnejad , امیررضا خوئی
    11th International Conference on Computational Plasticity (COMPLAS 2011), pp.1-12, 2011
26. "3D modelling of damage growth and ductile crack propagation using adaptive FEM technique"
    H. Moslemi , امیررضا خوئی
    11th International Conference on Computational Plasticity (COMPLAS 2011), pp.1-12, 2011
27. "Modeling of discontinuities in unsaturated porous media using extended FEM technique"
    امیررضا خوئی, L. Farrokhpour
    International Conference on Computational Methods for Coupled Problems in Science and Engineering (Coupled Problems 2011), pp.1-6, 2011
28. "3D dynamic modeling of large plastic deformations in powder die-pressing"
    امیررضا خوئی, S.O.R. Biabanaki, S.M. Parvaneh
    International Conference on Technology of Plasticity (ICTP 2011), pp.1-6, 2011
29. "A generalized finite element method for modelling arbitrary interfaces in large deformation problems"
    امیررضا خوئی, S.M. Parvaneh, S.O.R. Biabanaki
    11th International Conference on Computational Plasticity (COMPLAS 2011), pp.1-12, 2011
30. "Modelling of powder forming processes in transient–dynamic analysis of large plastic deformations"
    امیررضا خوئی, S.O.R. Biabanaki, S.M. Parvaneh
    Advances in Materials and Processing Technologies (AMPT 2011), pp.1-6, 2011
31. "Solving contact problems with uplift using an efficient method to enforce nonlinear contact constraints in complex geometries"
    S. Mohajeri, R. Eslahi, M. Zeinali, امیررضا خوئی
    International Conference on Computational Mechanics (AfriCOMP 2011), pp.1-4, 2011
32. "Modeling multiple crack problems with extended finite element method"
    امیررضا خوئی, P. Broumand
    18th Annual Conference on Mechanical Engineering (ISME 2010), pp.1-6, 2010
33. "Stability and size-dependency of temperature-related Cauchy-Born hypothesis in three-dimensional applications"
    امیررضا خوئی, P. Ghahremani, P. Banihashemi, M.J. Abdolhosseini-Qomi
    3rd Conference on Nanostructures, pp.1-4, 2010
34. "Effects of temperature and twist speed on torsion of single-walled carbon nanotubes"
    امیررضا خوئی, E. Ban, P. Banihashemi, M.J. Abdolhosseini-Qomi
    3rd Conference on Nanostructures (NS2010), pp.1-4, 2010
35. "Extended finite element modeling of large plasticity deformations in metal forming processes"
    امیررضا خوئی, S.O.R. Biabanaki, M. Anahid, S.M. Taheri-Mousavi
    Advances in Materials and Processing Technologies (AMPT 2010), pp.1-6, 2010
36. "An enriched–FEM technique for large frictional contact deformation"
    امیررضا خوئی, S.M. Taheri-Mousavi, S.O.R. Biabanaki, M. Anahid
    13th International Conference on Metal Forming, pp.1-4, 2010
37. "A new enriched–FEM technique in dynamic modelling of non-smooth contact problems"
    امیررضا خوئی, S. Mohajeri, S.O.R. Biabanaki
    4th European Conference on Computational Mechanics (ECCM 2010), pp.1-4, 2010
38. "Dynamic modeling of large plasticity deformations in powder compaction processes"
    امیررضا خوئی, S.O.R. Biabanaki, S.M. Parvaneh
    Advances in Materials and Processing Technologies (AMPT 2010), pp.1-6, 2010
39. "Boundary Cauchy-Born analysis of surface stress effects on nanowires"
    A. Aghaei, M.J. Abdolhosseini-Qomi, W. Tayyeb, امیررضا خوئی
    16th US National Congress of Theoretical and Applied Mechanics (USNCTAM 2010), pp.1-2, 2010
40. "Modeling surface effect via boundary Cauchy-Born method"
    M.J. Abdolhosseini-Qomi, A. Aghaei, امیررضا خوئی
    16th US National Congress of Theoretical and Applied Mechanics (USNCTAM 2010), pp.1-2, 2010
41. "Failure modeling of brittle materials in dynamic loading via the Gurson plastic–damage model"
    امیررضا خوئی, M. Hajibabaee
    8th International Congress on Civil Engineering (ICCE 2009), pp.1-8, 2009
42. "Modeling of large frictional contact problems using augmented-Lagrange method"
    امیررضا خوئی, S.M. Taheri Mousavi , S.O.R. Biabanaki
    8th International Congress on Civil Engineering (ICCE 2009), pp.1-8, 2009
43. "3D contact modeling of large plastic deformation in powder forming processes"
    امیررضا خوئی, S.O.R. Biabanaki, S.M. Taheri Mousavi, A.R. Vafa
    Advances in Materials and Processing Technologies (AMPT 2009), pp.1-12, 2009
44. "Modeling of dynamic cohesive fracture propagation in a multi-phase system"
    O.R. Baranilonbani, امیررضا خوئی, مسعود مفید
    4th International Conference on Applications of Porous Media (ICAPM 2009), pp.219-224, 2009
45. "Shape optimization of powder compaction processes via genetic algorithm technique"
    امیررضا خوئی, Sh. Keshavarz, علیرضا خالو
    Advances in Materials and Processing Technologies (AMPT 2009), pp.1-12, 2009
46. "Dynamic analysis of porous saturated media using the extended finite element method"
    امیررضا خوئی, E. Haghighat
    4th International Conference on Applications of Porous Media (ICAPM 2009), pp.114-119, 2009
47. "Modeling of dynamic cohesive fracture propagation in a multi-phase system"
    O.R. Baranilonbani, امیررضا خوئی, مسعود مفید
    4th International Conference on Applications of Porous Media (ICAPM 2009), pp.219-224, 2009
48. "3D modeling of non-planar curved crack growth using modified-SPR technique and adaptive mesh strategy"
    امیررضا خوئی, H. Moslemi
    10th International Conference on Computational Plasticity (COMPLAS 2009), pp.1-4, 2009
49. "Modeling of large frictional contact problems using augmented-Lagrange method"
    امیررضا خوئی, S.M. Taheri Mousavi, S.O.R. Biabanaki
    8th International Congress on Civil Engineering (ICCE 2009), pp.1-8, 2009
50. "A mortared X–FEM technique for large deformation frictional contact"
    امیررضا خوئی, S.O.R. Biabanaki , M. Anahid , I. Yadegaran
    International Conference on Computational Mechanics (AfriCOMP 2009), pp.1-3, 2009
51. "Shape optimization of powder compaction processes via genetic algorithm technique"
    امیررضا خوئی, Sh. Keshavarz, علیرضا خالو
    Advances in Materials and Processing Technologies (AMPT 2009), pp.1-12, 2009
52. "Dynamic modeling of multi-phase fluid flow in deforming porous media"
    امیررضا خوئی, T. Mohamadnejad
    4th International Conference on Applications of Porous Media (ICAPM 2009), pp.225-230, 2009
53. "The X–ALE–FEM technique for moving boundaries in large plasticity deformations"
    امیررضا خوئی, M. Anahid , S.O.R. Biabanaki
    International Conference on Computational Mechanics (AfriCOMP 2009), pp.1-3, 2009
54. "Failure modeling of brittle materials in dynamic loading via the Gurson plastic–damage model"
    امیررضا خوئی, M. Hajibabaee
    8th International Congress on Civil Engineering (ICCE 2009), pp.1-8, 2009
55. "SUT–DAM 3D: An integrated software environment for multi-disciplinary geotechnical engineering"
    امیررضا خوئی, H. Moslemi, M. Anahid, S.A. Gharehbaghi, O.R. Barani, T. Mohamadnejad
    Workshop on Earthquake Preparedness and Management, pp.1-20, 2009
56. "Modeling of large deformation frictional contact using an augmented–Lagrangian X-FEM technique"
    S.M. Taheri Mousavi, امیررضا خوئی
    International Conference on Extended FEM (XFEM 2009), pp.1-4, 2009
57. "An arbitrary Lagrangian–Eulerian technique for plasticity of pressure–sensitive material with reference to powder forming processes"
    امیررضا خوئی, M. Anahid , H. DorMohammadi , K. Shahim
    9th International Conference on Technology of Plasticity (ICTP 2008), pp.1-6, 2008
58. "‘An enriched finite element modeling for metal forming processes’"
    امیررضا خوئی, M. Anahid , S.O.R. Biabanaki , I. Yadegaran , K. Shahim , M. Nikbakht , A. Shamloo
    International Multi-Conference of Engineers and Computer Scientists (IMECS 2008), pp.1-6, 2008
59. "A more reliable finite element procedure via controlling the condition number of the system"
    S. Mohajeri, P. Broumand, امیررضا خوئی, M. Zeinali, L. Farrokhpour
    8th World Congress on Computational Mechanics (WCCM 2008), pp.1-6, 2008
60. "Modeling of metal forming processes via the enriched X-ALE-FEM technique"
    امیررضا خوئی, M. Anahid, S.O.R. Biabanaki
    8th World Congress on Computational Mechanics (WCCM 2008), pp.1-6, 2008
61. "Extended finite element modelling of large deformation frictional contact"
    امیررضا خوئی, S.O.R. Biabanaki, I. Yadegaran, M. Anahid
    8th World Congress on Computational Mechanics (WCCM 2008), pp.1-6, 2008
62. "Extended finite element modeling of large elasto-plastic deformations on arbitrary interfaces"
    امیررضا خوئی, S.O.R. Biabanaki , M. Anahid
    9th International Conference on Technology of Plasticity (ICTP 2008), pp.1-6, 2008
63. "A three-invariant cap plasticity model with kinematic and anisotropic hardening rule for powder and granular materials’"
    امیررضا خوئی, H. DorMohammadi
    9th International Conference on Computational Plasticity (COMPLAS 2007), pp.1-4, 2007
64. "Numerical modeling of large deformation frictional contact with the extended finite element method"
    M. Anahid, I. Yadegaran, امیررضا خوئی
    9th International Conference on Computational Plasticity (COMPLAS 2007), pp.1-4, 2007
65. "3D modeling of large elasto–plastic deformation via the extended finite element method"
    امیررضا خوئی, S.O.R. Biabanaki, M. Anahid
    9th International Conference on Computational Plasticity (COMPLAS 2007), pp.1-4, 2007
66. "'Implementation of the extended finite element method (X-FEM) in frictional contact problems"
    امیررضا خوئی, M. Anahid, I. Yadegaran, M. Nikbakht
    9th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM 2007), pp.1-6, 2007
67. "'An extended arbitrary Lagrangian-Eulerian finite element modeling (X-ALE-FEM) in large plasticity deformations'"
    امیررضا خوئی, M. Anahid, K. Shahim
    9th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM 2007), pp.1-6, 2007
68. "'An extended finite element method for compaction simulation of powder forming processes using a three-invariant cap plasticity'"
    امیررضا خوئی, M. Anahid, A.R. Azami, A. Shamloo
    9th International Conference on Material Forming (ESAFORM 2006), pp.1-6, 2006
69. "'A three-invariant cap plasticity model with kinematic hardening rule for powder materials"
    امیررضا خوئی, H. DorMohammadi, A.R. Azami
    3rd International Conference on Advanced Forming and Die Manufacturing Technology (AFDM 2006), pp.1-6, 2006
70. "'A new technique based on the extended finite element method in simulation of powder compaction processes'"
    امیررضا خوئی, M. Anahid, K. Shahim, A. Shamloo
    (ICMM 2006),, pp.1-6, 2006
71. "'Contact friction modelling with the extended finite element method (X-FEM)"
    امیررضا خوئی, M. Nikbakht
    11th International Conference on Metal Forming, pp.1-6, 2006
72. "'Modeling of contact friction using an enriched FE technique without meshing contact surface'"
    امیررضا خوئی, M. Nikbakht
    (ICMM 2006), pp.1-6, 2006
73. "'An extended arbitrary Lagrangian-Eulerian finite element modeling (X-ALE-FEM) in powder forming processes'"
    امیررضا خوئی, M. Anahid, K. Shahim
    3rd International Conference on Advanced Forming and Die Manufacturing Technology (AFDM 2006), pp.1-6, 2006
74. "'The extended finite element method (X-FEM) for powder forming problems',"
    امیررضا خوئی, A. Shamloo, M. Anahid, K. Shahim
    11th International Conference on Metal Forming, pp.1-6, 2006
75. "'Hardening plasticity models for deformation of porous and granular materials"
    امیررضا خوئی, A.R. Azami, A.S. Khan
    11th International Symposium on Plasticity and Its Current Application, pp.1-4, 2005
76. "'A three-invariant hardening cap plasticity for computational modelling of powder compaction process"
    امیررضا خوئی, A.R. Azami
    3rd MIT Conference on Computational Fluid and Solid Mechanics, pp.1-4, 2005
77. "‘Application of RKPM in numerical simulation of powder forming processes using cap plasticity model’"
    M. Samimi, امیررضا خوئی
    Computational Plasticity: Fundamentals and Applications, CIMNE, pp.966-969, 2005
78. "'Modeling of pressure-sensitive materials using a cap plasticity theory in extended finite element method"
    A. Shamloo, A.R. Azami, امیررضا خوئی
    International Conference on Advances in Materials and Processing Technologies (AMPT 2005), pp.1-4, 2005
79. "'FE modelling of mechanical interaction of lugged FRP rods with concrete; Comparison between experiment and simulation"
    امیررضا خوئی, H.R. Irannejad
    Advanced Polymer Composites for Structural Applications in Construction (ACIC 2004), pp.1-6, 2004
80. "FE analysis of bond for smooth FRP rods embedded in concrete"
    H.R. Irannejad, امیررضا خوئی
    XXI International Congress of Theoretical and Applied Mechanics (ICTAM 2004), pp.1-4, 2004
81. "'Computational modelling of frictional contact with extended finite element method"
    امیررضا خوئی, M. Nikbakht
    3rd International Conference on Advances in Structural Engineering and Mechanics (ASEM 2004), pp.1-8, 2004
82. "'Computational modelling of 3D Powder Compaction Processes"
    امیررضا خوئی, S. Azizi
    3rd International Conference on Advanced Manufacturing Technology (ICAMT 2004), pp.1-6, 2004
83. "'An arbitrary Lagrangian-Eulerian finite element method for cone-cap plasticity; Application to powder compaction simulation"
    امیررضا خوئی, M. Anahid, A.R. Azami, S. Azizi
    4th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2004), pp.1-20, 2004
84. "'Numerical modelling of mechanical interaction of lugged FRP rods with concrete'"
    H.R. Irannejad, امیررضا خوئی
    2nd International Conference on Structural Engineering, Mechanics and Computation (SEMC 2004), pp.1-6, 2004
85. "'Implementation of extended finite element method in pressure-sensitive material using cap plasticity model'"
    امیررضا خوئی, A. Shamloo
    3rd International Conference on Advances in Structural Engineering and Mechanics (ASEM 2004), pp.1-8, 2004
86. "'A generalized cap plasticity model for cold compaction of powder forming processes"
    A.R. Azami, امیررضا خوئی
    4th International Conference on Engineering Computational Technology (ECT 2004),, pp.1-8, 2004
87. "'Application of RKPM in numerical simulation of pressure-sensitive material using cap plasticity model"
    امیررضا خوئی, M. Samimi
    4th International Conference on Engineering Computational Technology (ECT 2004), pp.1-8, 2004
88. "Recent achievements in computational modeling of hydraulic fracture propagation and proppant transport in fractured porous media"
    امیررضا خوئی
    National Congress in Civil Engineering، 1399
89. "مدلساز یمکانیکی -هیدرولیکی -حرارتیمحیطمتخلخلتغییرشکلپذیردارا یترک با جریانس یالدوفاز یبه روش اجزاء محدود توسعهیافته"
    امیررضا خوئی، S.M.S. Mortazavi
    یازدهمین کنگره ملّی مهندسی عمران، صفحات:1-8، 1398
90. "مدلسازی عددی انتقال جرم چگال در محیط متخلخل ترک داربه روش اجزاء محدود توسعه یافته"
    N Hosseini، امیررضا خوئی
    یازدهمین کنگره ملّی مهندسی عمران، صفحات:1-8، 1398
91. "Recent advances in numerical simulation of interacting discontinuities in naturally fractured porous media"
    امیررضا خوئی
    11th National Congress on Civil Engineering، صفحات:1-8، 1398
92. "A gradient-enhanced computational homogenization technique for multi-scale modeling of heterogeneous materials with softening behavior"
    A.R. Raisi، امیررضا خوئی
    11th National Congress on Civil Engineering (NCCE 2018)، صفحات:1-8، 1398
93. "Modeling of fracture behavior of RC arch structures strengthened by FRP laminates with a damage-plasticity model/10th National Congress on Civil Engineering (NCCE 2017)"
    Y. Navid Tehrani ، امیررضا خوئی
    10th National Congress on Civil Engineering (NCCE 2017)، صفحات:1-8، 1395
94. "Applicability of conventional multi-scale method for random heterogeneous structures in quasi-brittle materials/10th National Congress on Civil Engineering (NCCE 2017)"
    M.A. S?adat ، امیررضا خوئی
    10th National Congress on Civil Engineering (NCCE 2017)، صفحات:1-8، 1395
95. "A Computational homogenization method for modeling the Kapitza thermal resistance in heterogeneous materials/10th National Congress on Civil Engineering (NCCE 2017)"
    R. Akbari ، امیررضا خوئی
    10th National Congress on Civil Engineering (NCCE 2017)، صفحات:1-8، 1395
96. "Modeling of failure and crack growth in earth–rockfill & concrete dams"
    امیررضا خوئی
    International Institute of Earthquake Engineering and Seismology، صفحات:1-22، 1389
97. "Modeling of fracture and crack propagation in structural and geotechnical problems with extended finite element method"
    امیررضا خوئی، T. Mohammadnejad ، E. Haghighat ، M. Vahab ، P. Borumand ، M. Anahid ، H. Azadi ، H. Moslemi
    6th National Congress on Civil Engineering (NCCE 2011)، صفحات:1-20، 1389
98. "با در نظر گرفتن اثر خرابی XFEMمدلسازی شکست شکل پذیر به کمک روش"
    امیررضا خوئی، P. Broumand
    پنجمین کنگره ملی مهندسی عمران، صفحات:1-8، 1389
99. "Modeling of ductile fracture with damage plasticity using the X-FEM technique"
    امیررضا خوئی، P. Broumand
    5th National Congress on Civil Engineering (NCCE 2010)، صفحات:1-8، 1389
100. "Modeling large plastic deformation of frictional contact in powder compaction process using the node-to-surface method and augmented-Lagrangian algorithm"
     S.M. Taheri Mousavi ، S.O.R. Biabanaki ، امیررضا خوئی
     4th National Conference of Metals and Materials Forming (MATFORM 2008)، صفحات:1-8، 1387
101. "Modeling of failure and crack growth in earth and rockfill dams"
     امیررضا خوئی، H. Moslemi ، S.O.R. Baranilonbani ، T. Mohamadnejad ، H. Azadi
     کارگاه آموزشی روش های نوین مقاوم سازی - تحلیل های عددی و تجربی سازه ها و مصالح، صفحات:16-18، 1387
102. "'Application of a new stress update procedure in arbitrary Lagrangian-Eulerian finite element modeling of large plasticity deformation'"
     K. Shahim، M. Anahid، امیررضا خوئی
     3rd National Congress on Civil Engineering (NCCE 2007)، صفحات:1-8، 1385
103. "'A three-dimensional plasticity model based on higher–order continuum theory in shear band localization with softening behavior'"
     S. Yadegari، امیررضا خوئی
     3rd National Congress on Civil Engineering (NCCE 2007)، صفحات:1-8، 1385
104. "'A single plasticity model with kinematic hardening rule for granular materials'"
     H. DorMohammadi، امیررضا خوئی
     3rd National Congress on Civil Engineering (NCCE 2007)، صفحات:1-8، 1385
105. "ارایه و کاربرد یک مدل پلاستیسیته چند سطحی در مدل سازی رفتار برشی خاک ها"
     نوید جمالی، امیررضا خوئی، سیدمحسن حائری
     اولین کنگره ملی مهندسی عمران، صفحات:1-8، 1383
106. "ارایه و کاربرد یک مدل پلاستیسیته چند سطحی در مدل سازی رفتار برشی خاک ها"
     نوید جمالی، امیررضا خوئی، سیدمحسن حائری
     اولین کنگره ملی مهندسی عمران، صفحات:1-8، 1383
107. "کاربرد روش اویلر- لاگرانژ دلخواه در مدل سازی عددی تغییر شکل های بزرگ الاستو- پلاستیک"
     مسعود آناهید، امیررضا خوئی
     اولین کنگره ملی مهندسی عمران، صفحات:1-8، 1383
108. "شبیه سازی عددی 3 بعدی رفتار مواد پودری در فرایند فشردن سرد با استفاده از مدل رفتاری cap"
     شایا عزیزی، امیررضا خوئی
     دومین کنفرانس شکل دهی فلزات و مواد ایران، صفحات:1-10، 1383
109. "کاربرد روش المان محدود بسط یافته (XFEM) در مسایل پلاستیسیته دو سطحی"
     امیر شاملو، امیررضا خوئی
     اولین کنگره ملی مهندسی عمران، صفحات:1-8، 1383
110. "شبیه سازی 3 بعدی رفتار مواد وابسته به فشار هیدرواستاتیک با استفاده از مدل پلاستیسیته cap"
     شایا عزیزی، امیررضا خوئی
     اولین کنگره ملی مهندسی عمران، صفحات:1-8، 1383
111. "کاربرد روش RKPM در شبیه سازی عددی مواد حساس به فشار با استفاده از مدل پلاستیسیته cap"
     محمد صمیمی، امیررضا خوئی
     اولین کنگره ملی مهندسی عمران، صفحات:1-8، 1383
112. "تحلیل عددی تراوش در محیط های خاکی غیر اشباع"
     سعید ابریشمی، امیررضا خوئی، سیدمحسن حائری
     اولین کنگره ملی مهندسی عمران، صفحات:1-8، 1383
113. "تحلیل عددی تراوش در محیط های خاکی غیر اشباع"
     سعید ابریشمی، امیررضا خوئی، سیدمحسن حائری
     اولین کنگره ملی مهندسی عمران، صفحات:1-8، 1383